beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 97

background image

83

Figure 39 Adding a charging policy

# Add a service.
Select the Service tab, and select Access Service > Service Configuration from the navigation tree to enter

the Service Configuration page. Then, click Add to enter the Add Service Configuration page and

perform the following configurations as shown in

Figure 40

:

Add a service named Dot1x auth and set the Service Suffix to bbb, which indicates the
authentication domain for the 802.1X user. With the service suffix configured, you must configure

usernames to be sent to the RADIUS service to carry the domain name.

Specify UserAcct as the Charging Plan.

If certificate authentication is required, Select EAP as the certificate authentication method, select
EAP-PEAP AuthN as the certificate type, and select MS-CHAPv2 AuthN as the certificate subtype.

Select Deploy VLAN and type 4 in the following textbox.

Click OK to finish the operation.

Figure 40 Adding a service

# Add a user.
Select the User tab, and select Access User View > All Access Users from the navigation tree to enter the
All Access Users page. Then, click Add to enter the Add Access User page and perform the following

configurations as shown in

Figure 41

:

Select the user or add a user named test