H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 268)

254
NOTE:
The action specified by the password-control login-attempt command takes effect immediately after
configured, and can thus affect the users already in the password control blacklist. Other password
control configurations take effect only for users logging in later and passwords configured later.
Setting user group password control parameters
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a user group and enter
user group view.
user-group group-name N/A
3. Configure the password
aging time for the user group. password-control aging aging-time
Optional.
By default, the password aging
time configured in system view is
used.
4. Configure the minimum
password length for the user
group.
password-control length length
Optional.
By default, the minimum password
length configured in system view is
used.
5. Configure the password
composition policy for the
user group.
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the password
composition policy configured in
system view is used.
Setting local user password control parameters
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a local user and enter
local user view.
local-user user-name N/A
3. Configure the password
aging time for the local user. password-control aging aging-time
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no aging time is
configured for the user group, the
setting in system view is used.
4. Configure the minimum
password length for the local
user.
password-control length length
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no minimum
password length is configured for
the user group, the setting in
system view is used.