H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 207)

193
d. Specify the virtual IP address of the VRRP group (the portal NAS-IP address specified on the
ACs).
e. Enter the key, which must be the same as that configured on the ACs.
f. Set whether to enable IP address reallocation. This example uses direct portal authentication,
and therefore select No from the Reallocate IP list.
g. Set whether to support the portal server heartbeat and user heartbeat functions. In this example,
select No for both Support Server Heartbeat and Support User Heartbeat.
h. Click OK.
Figure 92 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure 93 , click the icon in the Port Group Information Management column of
device AC to enter the port group configuration page.
Figure 93 Device list
b. On the port group configuration page, click Add to enter the page shown in Figure 94 .
Perform the following configurations:
c. Enter the port group name.
d. Select the configured IP address group from the IP Group list. The client's IP address must be
within this IP address group.
e. Use the default settings for other parameters.
f. Click OK.