H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 62)

48
• The ISP domain in the username
• The default ISP domain of the device
• The ISP domain specified for users with unknown domain names
If all the domains are unavailable, user authentication will fail.
NOTE:
Support for the authentication domain configuration depends on the access module. You can specify an
authentication domain for 802.1X, portal, or MAC address authentication.
To create an ISP domain:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an ISP domain and
enter ISP domain view.
domain isp-name N/A
3. Return to system view. quit N/A
4. Specify the default ISP
domain.
domain default enable isp-name
Optional.
By default, the default ISP domain is
the system predefined ISP domain
system.
5. Specify an ISP domain for
users with unknown domain
names.
domain if-unknown isp-name
Optional.
By default, no ISP domain is specified
for users with unknown domain
names.
NOTE:
To delete the ISP domain that is functioning as the default ISP domain, you must change it to a non-default
ISP domain first by using the domain default
disable command.
Configuring ISP domain attributes
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter ISP domain view. domain isp-name N/A
3. Place the ISP domain to the
state of active or blocked.
state { active | block }
Optional.
By default, an ISP domain is in
active state, and users in the
domain can request network
services.
4. Specify the maximum number
of active users in the ISP
domain.
access-limit enable
max-user-number Optional.
No limit by default.