H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 328)

314
[AC2-ui-vty0-4] authentication-mode scheme
# Enable the user interfaces to support SSH.
[AC2-ui-vty0-4] protocol inbound ssh
[AC2-ui-vty0-4] quit
# Create local user client001.
[AC2] local-user client001
[AC2-luser-client001] password simple aabbcc
[AC2-luser-client001] authorization-attribute level 3
[AC2-luser-client001] service-type ssh
[AC2-luser-client001] quit
# Configure the AC to authenticate SSH users by using password authentication and provide SFTP
services.
[AC2] ssh user client001 service-type sftp authentication-type password
NOTE:
To use publickey authentication, configure the public key of AC 1 on AC 2. For configuration steps, see
"
Configuring SSH2.0 ."
# Enable the SFTP server.
[AC2] sftp server enable
2. Configure the client (AC 1):
# Configure an IP address for VLAN-interface 2.
system-view
[AC1] interface vlan-interface 2
[AC1-Vlan-interface2] ip address 192.168.0.2 255.255.255.0
[AC1-Vlan-interface2] quit
[AC1] quit
# Establish a connection with the remote SFTP server and enter SFTP client view.
sftp 192.168.0.1
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
Enter password:
# Display files under the current directory of the server, delete file z, and check that the file has
been deleted successfully.
dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 startup.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
drwxrwxrwx 1 noone nogroup 0 Sep 01 06:22 new
-rwxrwxrwx 1 noone nogroup 225 Sep 01 06:55 pub