H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 213)

199
[AC1] hot-backup enable
# Configure VLAN 8 as the VLAN for AC hot backup.
[AC1] hot-backup vlan 8
[AC1] quit
# Create interface WLAN-ESS 1, and add it to VLAN 10.
[AC1] interface WLAN-ESS 1
[AC1-WLAN-ESS1] port link-type hybrid
[AC1-WLAN-ESS1] port hybrid vlan 10 untagged
[AC1-WLAN-ESS1] port hybrid pvid VLAN10
[AC1-WLAN-ESS1] quit
# Configure a WLAN service template, and bind the WLAN service template with interface
WLAN-ESS 1.
[AC1] wlan service-template 1 clear
[AC1-wlan-st-1] ssid abc
[AC1-wlan-st-1] bind WLAN-ESS 1
[AC1-wlan-st-1] service-template enable
[AC1-wlan-st-1] quit
# Configure AP on AC 1. (Set the access priority of AP to 7. A higher value represents a higher
priority. The default priority value is 4.)
[AC1] wlan ap ap1 model WA2100
[AC1-wlan-ap-ap1] serial-id 210235A29G007C000020
[AC1-wlan-ap-ap1] priority level 7
[AC1-wlan-ap-ap1] radio 1
[AC1-wlan-ap-ap1-radio-1] service-template 1
[AC1-wlan-ap-ap1-radio-1] radio enable
[AC1-wlan-ap-ap1-radio-1] quit
[AC1-wlan-ap-ap1] quit
7. Configure the stateful failover function:
# Configure the VLAN for stateful failover as VLAN 8.
[AC1] dhbk vlan 8
# Enable stateful failover and configure it to support the symmetric path.
[AC1] dhbk enable backup-type symmetric-path
Configuring AC 2
1. Configure VRRP:
# Create a VRRP group, and configure the virtual IP address of the VRRP group as 192.168.0.1.
[AC2] system-view
[AC2] interface vlan-interface 20
[AC2–Vlan-interface20] vrrp vrid 1 virtual-ip 192.168.0.1
# Set the priority of VLAN-interface 20 in the VRRP group to 150.
[AC2–Vlan-interface20] vrrp vrid 1 priority 150
[AC2–Vlan-interface20] quit
2. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
[AC2] radius scheme rs1