beautypg.com

Configuring hwtacacs schemes, Hwtacacs configuration task list, Creating an hwtacacs scheme – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 50

background image

36

Task Command

Remarks

Clear the buffered stop-accounting
requests for which no responses have

been received.

reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range

start-time stop-time | user-name

user-name }

Available in user view

Configuring HWTACACS schemes

NOTE:

You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.

HWTACACS configuration task list

Task Remarks

Creating an HWTACACS scheme

Required

Specifying the HWTACACS authentication servers

Required

Specifying the HWTACACS authorization servers

Optional

Specifying the HWTACACS accounting servers and the relevant
parameters

Optional

Specifying the shared keys for authenticating HWTACACS packets

Required

Setting the username format and traffic statistics units

Optional

Specifying a source IP address for outgoing HWTACACS packets

Optional

Setting timers for controlling communication with HWTACACS
servers

Optional

Displaying and maintaining HWTACACS

Optional

Creating an HWTACACS scheme

The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS

configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme

view:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Create an HWTACACS scheme

and enter HWTACACS scheme

view.

hwtacacs scheme

hwtacacs-scheme-name

Not defined by default.

NOTE:

Up to 16 HWTACACS schemes can be configured.

A scheme can be deleted only when it is not referenced.