H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 33)

19
Step Command Remarks
5. Specify the service types for
the local user.
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal | ppp | web }
By default, no service type is
specified for local users.
6. Place the local user to the
state of active or blocked.
state { active | block }
Optional.
When created, a local user is in
active state by default, and the user
can request network services.
7. Set the maximum number of
concurrent users of the local
user account.
access-limit max-user-number
Optional.
By default, there is no limit to the
maximum number of concurrent users
of a local user account.
This limit is not effective for FTP users.
8. Configure the password
control attributes for the
local user.
• Set the password aging time:
password-control aging
aging-time
• Set the minimum password
length:
password-control length
length
• Configure the password
composition policy:
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the password control
attributes of the user group apply. If
the user group has no password
control attributes configured, the
global settings apply. The global
settings include a 90-day password
aging time, a minimum 10-character
password length, one type number,
and one type length.
9. Configure the binding
attributes for the local user.
bind-attribute { call-number
call-number [ : subcall-number ] |
ip ip-address | location port
slot-number subslot-number
port-number | mac mac-address |
vlan vlan-id } *
Optional.
By default, no binding attribute is
configured for a local user.
call-number is supported for PPP
users. ip, location, mac, and vlan are
supported for LAN users. No binding
attribute is supported for other types
of local users.