Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 224
210
[AC-isp-dm1] quit
3.
Configure portal authentication:
# Configure a portal server on the AC, making sure that the IP address, port number and URL
match those of the actual portal server.
[AC] portal server newpt ip 192.168.0.111 key portal port 50100 url
http://192.168.0.111:8080/portal
# On the interface connected to the client, specify the authentication domain dm1 for portal users
and enable portal authentication.
[AC] interface vlan-interface 10
[AC–Vlan-interface10] portal domain dm1
[AC–Vlan-interface10] portal server newpt method direct
[AC–Vlan-interface10] quit
4.
Configure the portal server detection function:
# Configure the access device to detect portal server newpt, specifying the detection method as
portal heartbeat probe, setting the server probe interval to 40 seconds, and specifying the access
device to send a server unreachable trap message and disable portal authentication to permit
unauthenticated portal users if two consecutive probes fail.
[AC] portal server newpt server-detect method portal-heartbeat action trap permit-all
interval 40 retry 2
NOTE:
The product of interval and retry must be greater than or equal to the portal server heartbeat interval, and
H3C recommends configuring the interval as a value greater than the portal server heartbeat interval
configured on the portal server.
5.
Configure portal user synchronization:
# Configure the access device to synchronize portal user information with portal server newpt,
setting the synchronization probe interval to 600 seconds, and specifying the access device to log
off users if the users do not appear in the user synchronization packets sent from the server in two
consecutive probe intervals.
[AC] portal server newpt user-sync interval 600 retry 2
NOTE:
The product of interval and retry must be greater than or equal to the portal user heartbeat interval, and
H3C recommends configuring the interval as a value greater than the portal user heartbeat interval
configured on the portal server.
Verifying the configuration
Use the following command to view information about the portal server.
Portal server:
1)newpt:
IP : 192.168.0.111
Key : portal
Port : 50100
URL : http://192.168.0.111:8080/portal
Status : Up
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000