beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 206

background image

192

c.

Configure the portal server parameters as needed. This example uses the default values.

d.

Click OK.

Figure 90 Portal server configuration

2.

Configure an IP address group:

a.

Select Portal Service Management > IP Group from the navigation tree to enter the portal IP
address group configuration page.

b.

Click Add to enter the page shown in

Figure 91

.

c.

Enter the IP group name.

d.

Enter the start IP address and end IP address of the IP group. Make sure that the client's IP
address is in the IP group.

e.

Select a service group. By default, the group Ungrouped is used.

f.

Select the IP group type Normal.

g.

Click OK.

Figure 91 Adding an IP address group

3.

Add a portal device:

a.

Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page.

b.

Click Add to enter the page shown in

Figure 92

.

c.

Enter the device name AC.