Figure 76 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 192
178
Figure 76 Portal server configuration
2.
Configure an IP address group:
a.
Select Portal Service Management > IP Group from the navigation tree to enter the portal IP
address group configuration page.
b.
Click Add to enter the page shown in
c.
Enter the IP group name.
d.
Enter the start IP address and end IP address of the IP group. Make sure that the client's IP
address is in the IP group.
e.
Select a service group. By default, the group Ungrouped is used.
f.
Select the IP group type Normal.
g.
Click OK.
Figure 77 Adding an IP address group
3.
Add a portal device:
a.
Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page.
b.
Click Add to enter the page shown in
c.
Enter the device name AC.
d.
Enter the IP address of the AC's interface connected to the client.
e.
Enter the key, which must be the same as that configured on the access device (AC).
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000