beautypg.com

Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 351

background image

337

Figure 142 Network diagram

Configuration procedure

1.

Add the port connecting the AC to VLAN 10, and configure the IP address of VLAN-interface 10

on the switch. (Details not shown.)

2.

Configure the DHCP server on the switch:
# Configure DHCP address pool 0

system-view

[Switch] dhcp enable

[Switch] dhcp server ip-pool 0

[Switch-dhcp-pool-0] network 10.1.1.0 mask 255.255.255.0

3.

Configure Client 1 and Client 2 as 802.1X clients (the configuration procedure is not shown) and
configure them to upload IP addresses for ARP detection.

4.

Configure the AC:
# Enable wireless 802.1X authentication on the AC.

system-view

[AC] interface WLAN-ESS0

[AC-WLAN-ESS0] port access vlan 10

[AC-WLAN-ESS0] port-security port-mode userlogin-secure-ext

[AC-WLAN-ESS0] quit

# Configure a clear-type WLAN service template, set the service set identifier (SSID) to dot1x, and

bind the WLAN-ESS port to the template.

[AC] wlan service-template 1 clear

[AC-wlan-st-1] ssid dot1x

[AC-wlan-st-1] bind WLAN-ESS 0

[AC-wlan-st-1] service-template enable