H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 68)

54
Step Command Remarks
3. Enable the accounting
optional feature.
accounting optional
Optional.
Disabled by default.
With the accounting optional
feature, a device allows users
to use network resources when
no accounting server is
available or communication
with all accounting servers
fails.
4. Specify the default accounting
method for all types of users.
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default setting is local.
5. Specify the command
accounting method.
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
Optional.
The default accounting method
is used by default.
6. Specify the accounting
method for LAN users.
accounting lan-access { local | none |
radius-scheme radius-scheme-name
[ local | none ] }
Optional.
The default accounting method
is used by default.
7. Specify the accounting
method for login users.
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.
8. Specify the accounting
method for portal users.
accounting portal { local | none |
radius-scheme radius-scheme-name
[ local ] } Optional.
The default accounting method
is used by default.
9. Specify the accounting
method for PPP users.
accounting ppp { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.
NOTE:
•
If you configure the accounting optional command, the limit on the number of local user connections is
not effective.
• The accounting method specified with the accounting default command is for all types of users and has
a priority lower than that for a specific access type.
• If you specify the radius-scheme radius-scheme-name local or hwtacacs-scheme
hwtacacs-scheme-name local option configured when configuring an accounting method, local
accounting is the backup method and is used only when the remote server is not available.
• If you specify only the local or none keyword in an accounting method configuration command, the
device has no backup accounting method and performs only local accounting or does not perform any
accounting.
• Accounting is not supported for FTP services.