H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 196)

182
3. Add a portal device:
a. Select User Access Manager > Portal Service Management > Device from the navigation tree to
enter the portal device configuration page.
b. Click Add to enter the page shown in Figure 83 .
c. Enter the device name AC.
d. Enter the IP address of the router's interface connected to the user.
e. Enter the key, which must be the same as that configured on the switch.
f. Set whether to enable IP address reallocation. This example uses direct portal authentication,
and therefore select No from the Reallocate IP list.
g. Select whether to support sever heartbeat and user heartbeat functions. In this example, select
No for both Support Server Heartbeat and Support User Heartbeat.
h. Click OK.
Figure 83 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure 84 , click the icon in the Port Group Information Management column of
device AC to enter the port group configuration page.
Figure 84 Device list
b. On the port group configuration page, click Add to enter the page shown in Figure 85 .
c. Enter the port group name.
d. Select the configured IP address group. The client's IP address must be within this IP address
group.
e. Use the default settings for other parameters.