H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 92
78
Select User Access Manager > Portal Service Management > Device from the navigation tree to enter the
portal device configuration page. Then, click Add to configure a portal device as follows:
•
Type the device name NAS.
•
Type the IP address of the access interface on the AC, which is 192.168.1.70.
•
Type the key, which is portal, the same as that configured on the AC.
•
Specify whether to enable IP address reallocation. Because direct portal authentication is used in
this example, select No from the Reallocate IP drop-down list.
•
Click OK to finish the configuration.
Figure 34 Adding a portal device
# Associate the portal device with the IP address group.
As shown in
, in the device list on the portal device configuration page, click the icon in the Port
Group Information Management column of device NAS to enter the port group configuration page.
Figure 35 Device list
On the port group configuration page, click Add to configure a port group as follows:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000