H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 100
86
•
Add a service named Dot1x auth, and set the service suffix to bbb, the authentication domain for
the 802.1X user. With the service suffix configured, you must configure the access device to send
usernames that carry domain names to the RADIUS server.
•
Select UserAcct as the charging plan.
•
Select EAP as the certificate authentication method.
•
Select EAP-PEAP AuthN as the certificate type, and select MS-CHAPv2 AuthN as the certificate
subtype.
•
Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
•
Configure other parameters as needed.
•
Click OK to finish the configuration.
Figure 44 Adding a service
# Add a user.
Click the User tab, and select Access User View > All Access Users from the navigation tree to enter the
All Access Users page. Then, click Add to configure a user as follows:
•
Select the user or add a user named hello
•
Specify the account name as dot1x and configure the password
•
Select the access service Dot1x auth
•
Configure other parameters as needed and click OK to finish the configuration
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000