H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 109
95
[AC] user-interface vty 0 4
[AC-ui-vty0-4] authentication-mode scheme
[AC-ui-vty0-4] quit
# Specify the system predefined ISP domain system as the default ISP domain.
[AC] domain default enable system
# Create an HWTACACS scheme named hwtac.
[AC] hwtacacs scheme hwtac
# Specify the IP address of the primary authentication server as 10.1.1.1 and the port for authentication
as 49.
[AC-hwtacacs-hwtac] primary authentication 10.1.1.1 49
# Set the shared key for authenticating authentication packets to expert.
[AC-hwtacacs-hwtac] key authentication expert
# Specify that usernames sent to the HWTACACS server carry no domain name.
[AC-hwtacacs-hwtac] user-name-format without-domain
[AC-hwtacacs-hwtac] quit
# Configure the ISP domain to use local authentication for Telnet users.
[AC] domain system
[AC-isp-system] authentication login local
# Configure to use HWTACACS scheme hwtac for privilege level switching authentication.
[AC-isp-system] authentication super hwtacacs-scheme hwtac
[AC-isp-system] quit
# Create a local Telnet user account test.
[AC] local-user test
[AC-luser-test] service-type telnet
[AC-luser-test] password simple aabbcc
# Configure the user level of the Telnet user as 0 after user login.
[AC-luser-test] authorization-attribute level 0
[AC-luser-test] quit
# Configure the AC to use the HWTACACS server for level switching authentication, and to use local
authentication as the backup method.
[AC] super authentication-mode scheme local
# Configure the password for privilege level switching authentication as 654321.
[Switch] super password simple 654321
[Switch] quit
3.
Verify the configuration
a.
Establish a connection between the Telnet user and AC
# Telnet to the AC from Client, and enter the username test@bbb and password aabbcc. You log in to the
AC and can access level 0 commands.
b.
Perform user privilege level switching
# Execute the command for switching to user privilege level 3 and enter password pass3 as prompted.
Password:
User privilege level is 3, and only those commands can be used
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000