beautypg.com

Creating a radius scheme – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 37

background image

23

Task Remarks

Setting the username format and traffic statistics units

Optional

Specifying the source IP address for outgoing RADIUS packets

Optional

Specifying a backup source IP address for outgoing RADIUS packets

Optional

Setting timers for controlling communication with RADIUS servers

Optional

Configuring RADIUS accounting-on

Optional

Configuring the IP address of the security policy server

Optional

Enabling the RADIUS offload feature

Optional

Configuring interpretation of RADIUS class attribute as CAR parameters

Optional

Enabling the trap function for RADIUS

Optional

Enabling logging of RADIUS packets

Optional

Enabling the RADIUS listening port of the RADIUS client

Optional

Displaying and maintaining RADIUS

Optional

Creating a RADIUS scheme

Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter

RADIUS scheme view:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Create a RADIUS scheme and

enter RADIUS scheme view.

radius scheme
radius-scheme-name

No RADIUS scheme is specified by
default.

NOTE:

A RADIUS scheme can be referenced by multiple ISP domains at the same time.

Specifying the RADIUS authentication/authorization servers

You can specify one primary authentication/authorization server and up to 16 secondary

authentication/authorization servers for a RADIUS scheme so that the NAS can find a server for user

authentication/authorization when using the scheme. When the primary server is not available, a

secondary server is used, if any. In a scenario where redundancy is not required, specify only the
primary server.
In RADIUS, user authorization information is piggybacked in authentication responses sent to RADIUS

clients. It is neither allowed nor needed to specify a separate RADIUS authorization server.
To specify RADIUS authentication/authorization servers for a RADIUS scheme:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter RADIUS scheme view.

radius scheme radius-scheme-name

N/A