Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 313
299
To establish a connection with the SSH server:
a.
Launch PuTTY.exe to enter the interface shown in
.
b.
In the Host Name (or IP address) text box, enter the IP address of the server.
Figure 127 SSH client configuration interface
c.
Click Open to connect to the server.
If the connection is normal, you are prompted to enter the username and password. After entering
the correct username (client001) and password (aabbcc), you can enter the AC's configuration
interface.
When the AC acts as an SSH server for publickey
authentication
Network requirements
As shown in
the host (the SSH client) and the AC (the SSH server) can reach each other.
The host runs SSH client software to log into the AC for configuration. Publickey authentication is used,
and the public key algorithm is RSA.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000