beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 218

background image

204

Figure 101 Portal server configuration

2.

Configure the IP address group:

a.

Select Portal Service Management > IP Group from the navigation tree to enter the portal IP

address group configuration page.

b.

Click Add to enter the page shown in

Figure 102

.

c.

Enter the IP group name.

d.

Enter the start IP address and end IP address of the IP group. Make sure that the client's IP

address is in the IP group.

e.

Select a service group. By default, the group Ungrouped is used.

f.

Select the IP group type Normal.

g.

Click OK.

Figure 102 Adding an IP address group

3.

Add a portal device:

a.

Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page.

b.

Click Add to enter the page shown in

Figure 103

.

c.

Enter the device name AC.

d.

Enter the IP address of AC's interface connected to the user.

e.

Enter the key, which must be the same as that configured on the AC.