H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 253)

239
OUI value:
WLAN-ESS1 is link-up
Port mode is userLoginSecureExt
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
# If a user comes online, you can use the display connection command and the display wlan client
command to view information about the user.
display connection ucibindex 315
Index=315 , [email protected]
MAC=00-17-9A-00-7B-2F
IP=N/A
IPv6=N/A
Access=8021X ,AuthMethod=EAP
Port Type=Wireless-802.11,Port Name=WLAN-DBSS1:0
Initial VLAN=1, Authorization VLAN=N/A
ACL Group=Disable
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2010-11-16 16:58:51 ,Current=2010-11-16 16:59:29 ,Online=00h00m38s
Total 1 connection matched.
display wlan client verbose
Total Number of Clients: 1
Total Number of Clients Connected : 1
Client Information
-------------------------------------------------------------------------------
MAC Address : 0017-9a00-7b2f
AID : 1
AP Name : AP1
Radio Id : 1
SSID : sectest
BSSID : 000f-e278-8020
Port : WLAN-DBSS1:0
VLAN : 1
State : Running
Power Save Mode : Active
Wireless Mode : 11g
QoS Mode : WMM
Listen Interval (Beacon Interval) : 10
RSSI : 37
Rx/Tx Rate : 5.5/18
Client Type : WPA
Authentication Method : Open System