H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 145)

131
[AC-wlan-ap-ap1] radio 1 type dot11g
# Bind service template 1 to radio 1.
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
Verifying the configuration
# After a user passes authentication, use the display connection command to display the 802.1X user
connection. The output shows that the user passes authentication.
[AC]display connection
Index=1,[email protected]
MAC=00-40-96-B3-8A-77
IP=N/A
IPv6=N/A
[AC]display connection ucibindex 1
Index=1, Username= [email protected]
MAC=00-40-96-B3-8A-77
IP=N/A
IPv6=N/A
Access=8021X ,AuthMethod=EAP
Port Type=Wireless-802.11,Port Name=WLAN-DBSS1:1
Initial VLAN=2, Authorization VLAN=N/A
ACL Group=3000
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2011-06-30 17:29:39 ,Current=2011-06-30 17:30:51 ,Online=00h01m13s
Total 1 connection matched.
# Use the user account to pass authentication, and then ping the FTP server.
C:\>ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.0.0.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
The output shows that ACL 3000 has taken effect on the user, and the user cannot access the FTP server.