Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 88)

Chapter 5: Graphical User Interface (GUI/WEB) Configuration Pages
Chapter 5-34 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Destination
Network
Destination
Netmask
Metric
Gateway
Interface
Gateway
Address
100.1.1.53 128.0.0.0 1 IP address 0.0.0.0
STATIC ROUTES
Return to the IP Configuration page
Add FDL
IP Address
tdm1 vcc1
FDL
FDL
Destination
Network
Destination
Netmask
Metric
Gateway
Interface
Gateway
Address
1 IP address
100.1.1.53 128.0.0.0 4 IP address 0.0.0.0 FDL 1
Add
Selecting
FDL and
entering FDL
addresses
Delete
Screen
results after
clinking on
the 'Add'
button
Figure 29: Configuring a Static Route for the FDL
C ONFIGURE THE
IP
PARAMETERS
FOR THE FDL
From the IP/Routing menu click on the IP button. From the resulting IP
configuration menu shown in Figure 27, click on the FDL button. Figure 30
shows the FDL IP configuration page. Referring to Table 9 enter all the
necessary parameters. Clicking on the save button saves your choices and
returns you to the IP configuration menu.
This completes the FDL configuration.
Click on the IP/Routing Configuration link to continue to configure the router.
Option: on off
Address: 192.168.13.254
Broadcast: 192.168.13.255
Netmask: 255.255.255.0
RIP Send:
RIP Receive:
Save
OFF
OFF
FDL IP Configuration
Click on the arrow to select
from these additional options
Version 1
Version 1
Version 2
Version 1 compatible
OFF
Figure 30: Configuring the FDL IP parameters