Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 205)

Chapter 9- Hardware Specifications
SHARK™ IAD User's Guide XEL P/N & Release: 9SA-USRS-9.0R1.02 Chapter 9-5
SHARK™ IAD Chassis, 9SA-CHAS-000
Figure 1: SHARK™ Integrated Access Device
G
ENERAL
DESCRIPTION
The chassis is a 2U high (3.5”) X 17.5” wide X 13” deep steel shelf. See Figure
1. The Chassis' overall front to back depth once installed including all cabling
and connector housings is sixteen and a half inches. It may be rack mounted in a
19" or 23" rack, wall mounted or table/shelf mounted. See the Installation
chapter for complete installation details. It has three 5" slots for voice modules.
It has six 4" wide slots for two WAN modules, two LAN modules, a router
module, and a cross connect module. The right slot is for the power module.
See Figure 2. Refer to the individual module specification in this chapter for
each module's detailed specifications.