Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 62)

Chapter 5: Graphical User Interface (GUI/WEB) Configuration Pages
Chapter 5-8 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Figure 2: SHARK™ IAD Home Page
T
HE
H
OME
P
AGE
The SHARK™ IAD home page is the first page that appears upon logging into
the system. Notice the side navigation bar. This navigation bar will appear on
every page enabling the user to navigate through the SHARK™ IAD's GUI
interface with ease and efficiency. It consists of four "hot links" used to directly
access the various SHARK™ IAD functions.
T HE NAVIGATION
BAR
The Home button will bring the user back to this page from anywhere in the GUI
interface. The Help button will give XEL's contact information. The
Status/Alarms button displays the status and alarm page. Clicking on the
Maintenance button accesses the maintenance and diagnostics page.
I
NSTALLED
MODULES
The Home page is laid out exactly like the front of the SHARK™ IAD unit. It
displays which modules are currently installed in the SHARK™ IAD. Notice
that each module has a status indicator light with a status code beneath it, a
status button, and a config button. Clicking the status button will immediately
display the module's status and its software (SW) and hardware (HW) version
information. The status for any module can also be obtained by selecting the
status/alarms button in the navigation bar. Clicking the config button for any
module will display the configuration page for that module as shown in Figure 3.