Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 13)

Chapter 1: Introduction
SHARK™ IAD User's Guide XEL P/N & Release: 9SA-USRS-9.0R1.02 Chapter 1-3
Chapter 1: Introduction Introduces the user to the SHARK™ IAD system. It covers
features, applications and functional description of the major
components.
Chapter 2: SHARK™ IAD installation
options
Describes the three installation options along with extensive
installation drawings.
Chapter 3: SHARK™ IAD Cable
Guide
All cable part numbers with sketches and pinouts.
Chapter 4: User Interface Hardware
Connections
This Getting Started Chapter will focus on how to connect to the
Ethernet port for a GUI or IP Telnet session and setup
workstation to configure the SHARK™ IAD using GUI pages or
the CLI.
Chapter 5: Graphical User Interface
(GUI/WEB)
Configuration Pages
This chapter explains the GUI configuration pages. It follows a
logical typical setup by explaining each page in the order that the
system presents them.
Chapter 6: Using the Command
Line Interface (CLI)
This chapter explains the CLI command syntax. It begins by
explaining the hardware connections for communicating to the
SHARK™ IAD. The root system commands are explained next.
It continues by explaining each command in the sequence that the
CLI configurator follows when it's in the stepping mode.
Chapter 7: Status and Alarms This chapter covers viewing status displays and the alarms.
Chapter 8: Maintenance/
Diagnostics/Monitoring
After installing and configuring the system, your next step is to
test it. This chapter describes test and maintenance capabilities.
Chapter 9: Hardware Specifications This chapter covers the specifications for each component.
Appendix A: Glossary Dictionary of Telephony terms used in this manual.
Appendix B: SNMP Traps Description of the SNMP Traps sent.