Serial v.35 module, 9sa-sv35-000, General description, Hardware specifications – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 238: Physical size, Faceplate indicator, Power dissipation, Erial, V.35 m, Odule, 9sa-sv35-000 -38

Chapter 9- Hardware Specifications
Chapter 9-38 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Serial V.35 Module,
9SA-SV35-000
Figure 30:
V.35 module faceplate
G
ENERAL
DESCRIPTION
The V.35 module provides a serial data stream from a T1 circuit in the WAN-1
or WAN-2 slot. Bandwidth is determined the Cross-Connect configuration and
by software optioning.
The system software controls the embedded system operations for the V.35
Module. The system software detects and controls the signaling leads. See the
"Configuration" section of this manual for details how to configure this module.
H
ARDWARE
S
PECIFICATIONS
Physical size*
Width: 4.25”
Length: 12.66"
Height: 1.0”
Weight: 0.40 lbs
*All measurements include faceplate
There is one LED on the faceplate labeled Busy.
Faceplate
Indicator
This LED flashes green when data is passed in either direction on the interface.
It will flash during power up and or self test.
Power Dissipation
Normal Power Consumption per V.35 module – 0.49 watts @ 5V.
Max Power dissipation per V.35 module – 0.75 watts max @ 5V
9SA-SV35-000
XEL
AC
TIV
ITY