Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 84)

Chapter 5: Graphical User Interface (GUI/WEB) Configuration Pages
Chapter 5-30 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
XE
L
SHARK
devi
ce
ID
:xel shark100
0011
Home
Help
Status/
Alarms
Maintenance
XEL SHARK
device ID:xel shark1000011
XEL Communications Inc, 17101 East Ohio Drive, Aurora Co 80017
XSP 1OO Shark
TM
STATUS CONFIG INS
FXS
STATUS CONFIG INS
FXS
STATUS CONFIG INS
FXS
STATUS CONFIG OOS
Xcon
STATUS CONFIG NPR
T1
STATUS CONFIG INS
T1
CONFIG
STATUS CONFIG EMP
STATUS CONFIG
STATUS INS
Router
INS
Power
Supply
STATUS EMP
Module
STATUS
CONFIG
SHARK 010101000011
System
Point and Click
here for the Router
configuration page.
Figure 23: Home page selecting Router configure menu
XEL Communications Inc, 17101 East Ohio Drive, Aurora CO 80017
Home
Help
Status/
Alarms
Maintenance
IP/Routing Configuration
NOTE: The IP router does not assume the new configuration assigned by these pages until
a "coldstart router" command is issued or the box is power cycled. The coldstart command
is accessed via the "
Router Review " page.
System FDL
TDM Setup IP
DHCP DNS
Bridge Pinhole
SNMP Craft Port
Router Review and Restart
Figure 24: IP/Routing Configuration menu
Continue to configure your SHARK™ IAD by clicking on each button of the IP
menu in the order shown in Figure 24. After filling in all the necessary fields for
each of these pages you must click on the save button on each page to store your
new settings. Once you have completed configuring all of the IP/Router pages,
you must access the Router review & Restart page and initiate a router coldstart
by clicking on the coldstart button of the Router review & Restart page to load