Main ds1, Auxiliary ds1, Router connection – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 218: Main ds1 -18 auxiliary ds1 -18, Igure, Lock, Iagram showing, Ross, Onnect interfacing with, Ystem
Chapter 9- Hardware Specifications
Chapter 9-18 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Main Cross Connect
Controller
Main T1
Auxilary T1
Voice
IP Router / Bridge
Network Management
Alarm
Data
Signaling
Alarm
Ethernet (10BaseT)
T1
V.35
Ethernet (10BaseT)
T1
V.35
FEC
SCC C
SCC B
Bypass Data and
Signaling
Router / Bridge
Data
Bypass Data and
Signaling
Router / Bridge
Data
Alarm Processing
Data
Signaling
4.096 Mbit/sec
Two serial data streams (N x 64K) plus one network management DS0
Ethernet
(10/100)
Tone RAM
either hardware
or
read from
Controller
at 8 Kb/sec
Clock Selection
Local
Oscillator
Cross
Connect
Figure 14:
Block Diagram showing Cross-Connect interfacing with System
Data Clock Freq.
Data rate:
DS0 channels:
Parallel signaling channel.
2.048 MHz
1.536 Mbps
24 (32 DS0s for future E1 access modules)
Main DS1
The spare capacity allows the use of E1 signals in the future
Auxiliary DS1
Data Clock Freq.
Data rate:
DS0 channels:
Parallel signaling channel.
2.048 MHz
1.536 Mbps
24 (32 DS0s for future E1 access modules)
The spare capacity allows the use of E1 signals in the future