Shark system, Show, Show alarms – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 135: Show bridge interfaces, Show bridge tables, Show crash, Show dhcp agent, Show dhcp server leases, Show dhcp server store, Show enet [all

Chapter 6: Using the Command Line Interface (CLI)
SHARK™ IAD User’s Guide
XEL P/N & Release 9SA-USRS-9.0R1.02
Chapter 6-19
System response:
SHARK SYSTEM
Displays which modules are installed as seen from the front of the unit.
Example: > shark system
System Response:
FXS
Xcon
Router
FXS
T1
T1
PwrSup
FXS
Empty
Empty
SHOW
SHOW ALARMS
Displays alarms and test conditions for all modules
SHOW BRIDGE
INTERFACES
Displays the bridge interfaces
SHOW BRIDGE
TABLES
Displays the bridge tables
SHOW CRASH
Displays the most recent crash information, if any, for your SHARK™ IAD.
SHOW DHCP AGENT
Displays the DHCP relay-agent leases
SHOW DHCP SERVER
LEASES
[used | free ] where
used = to show leases which are active (or have been)
free= to display available leases
Displays the DHCP leases stored in RAM by your SHARK™ IAD.
SHOW DHCP SERVER
STORE
Displays the DHCP leases stored in NVRAM by your SHARK™ IAD.
SHOW ENET
[
ALL
] Displays the Ethernet statistics for your SHARK™ IAD. Adding the argument
'all' displays more detailed information.
SHOW FDL
Displays the FDL statistics for your SHARK™ IAD.
SHOW FRMR DLCI
Displays the FRMR dlci tables
SHOW FRMR TREE
Displays the FRMR tree
SHOW FRMR PDLCI
Displays the FRMR dlci
SHOW IP ARP
Displays the Ethernet address resolution table stored in your SHARK™ IAD.
SHOW IP INTERFACES
Displays the IP interfaces for your SHARK™ IAD.
SHOW IP ROUTES
Displays the IP routes stored in your SHARK™ IAD.
SHOW IP SOCKETS
Displays the TCP sockets.
SHOW IPMAP
Displays the IP map table for your SHARK™ IAD.
SHOW LOG
[
ALL
] Displays blocks of information from the SHARK™ IAD diagnostic log. To see
the entire log since the last restart, you can repeat the show log command or you
can enter show log all and scroll through the complete log.
SHOW LOG OLD
[
ALL
] This command is only available if using router module 9SB-RTR0-000.
Displays all log entries prior to the last restart of the router module. To see the
Module: Router
Module Information
Hardware Rev: 1
Serial Number: 010101000011
Mfg. Date (M/D/Y): 1/10/2001
Current State: UP
XEL Shark SW v7.5R1