Xc2t module, Xc2t m, Odule – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual

Page 72: Igure, Wan c, Ross, Onnect, Cross connect wan1 configuration, Figure 15: wan cross connect page xc2t m

Chapter 5: Graphical User Interface (GUI/WEB) Configuration Pages

Chapter 5-18

XEL P/N & Release: 9SA-USRS-9.0R1.02

SHARK™ IAD User's Guide

Figure 15:

WAN Cross Connect Page

XC2T M

ODULE

On the XC2T module clicking on the config button will display the XC2T
Configuration page. See Figure 16. On the XC2T Configuration page, select
the Alarm Reporting mode to be Enable and then press the Save button. This
will set the module alarm reporting to functional and then return the screen to
the home page. Again at the home page, click on the config button of the XC2T
module to display the XC2T Configuration page. Now select which T1 or WAN
card the cross connects will originate from. This will take you to the page to
make the cross connects to all items from the selected T1 or WAN card See
Figure 17.

Cross Connect WAN1 Configuration

Source

Time-Slot

Destination

Time-Slot

Destination

Time-Slot

Destination

Module

Source

Time-Slot

Time Slot 1
Time Slot 2

Time Slot 3

Time Slot 4
Time Slot 5

Time Slot 6

Time Slot 7

Time Slot 8
Time Slot 9

Time Slot 10
Time Slot 11

Time Slot 12

Time Slot 13
Time Slot 14

Time Slot 15

Time Slot 16
Time Slot 17
Time Slot 18

Time Slot 19

Time Slot 20

Time Slot 21
Time Slot 22
Time Slot 23

Time Slot 24

Clear All

Save

Destination

Module

View Cross Connect WAN2 Configuration

View WAN1 Trunk Processing Configuration

router

none

lan1

voice1

voice2