Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 86)

Chapter 5: Graphical User Interface (GUI/WEB) Configuration Pages
Chapter 5-32 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Facility Data Link (FDL)
Mode : off on
Source : WAN1 WAN2
NOTE: Enabling the FDL disables T1 performance monitoring.
Save
Figure 25: Facility Data Link (FDL) Enabling and WAN port selection for XCON modules
Figure 26: Facility Data Link (FDL) Enabling and WAN port selection for XC2T modules
FDL IP R OUTING
USING
T
HE
D EFAULT
G
ATEWAY
IP Configuration
Fast Ethernet
FDL
TDM 1 VCC 1
Gateway
Static Routes
Return to the main IP/Routing Configuration page
NOTE: If the FDL mode or any of the VCC’s in TDM are enabled, they will appear in this screen.
Figure 27:
The IP Configuration menu
Facility Data Link (FDL)
Mode : off on
Source :
WAN1 WAN2
NOTE: Enabling the FDL disables T1 performance monitoring.
Save
T1-1 T1-2