Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 17)

Chapter 1: Introduction
SHARK™ IAD User's Guide XEL P/N & Release: 9SA-USRS-9.0R1.02 Chapter 1-7
IP Router • One 10/100 BaseT port standard.
• Network Address Translation (NAT).
• TCP/IP, PAP, CHAP, RIPv1, RIPv2, ICMP, ARP, DNS, HTTP, UDP,
and LCP supported.
• DHCP (server/relay agent) for IP address management.
• Datalink transport via Frame Relay, PPP, or HDLC.
• 2 Data Pipes with variable bandwidth.
• Transparent bridging.
Frame Relay Access
Device • RFC 1490 (Multiprotocol support), LMI Q.933 Annex A, LMI ANSI T1.617
Annex D, LMI FRF 1.1 supported.
• Supports 2 Data pipes with 4 PVCs each.
Network
Management • Full provision, monitor, and alarm capabilities for each interface.
• HTTP based management through the web browser.
• Managed via 10/100 BaseT, WAN, Craft port, or Facility Data Link (FDL).
• Command Line Interface (CLI) via Craft port or Telnet.
• Simple Network Management Protocol (SNMP) for monitoring purposes.
• RS232 craft port that is modem compatible.
• Complete software upgrades for all modules via remote download.
• Multi-Level password protection.
V.35 Serial Port • Keyed to fit into the LAN-1 and LAN-2 slots only.
• Nx56/64 port speed.
Chassis • 2 U spaces high (3.5”) x 17.5” wide x 13” deep (If rack mounted, a 1 U
space must be provided between units for passive cooling.
• Mountable on wall (w/ hinges), 19" or 23" rack, or a desktop.
• Two WAN slots available (T1 CSU/DSX).
• Two LAN slots available for add drop T1 CSU/DSX capability or V.35
interface.
• Three analog voice slots available (8-channel FXS or FXO cards).
• One Cross Connect slot for XCON or XC2T card
• One Router / controller slot.
• All modules are field-replaceable and "hot-swappable".
Power • -48 VDC (standard).
• 120 VAC with external converter.
Environmental 0 ° – 50° Centigrade (32° – 122° Fahrenheit).