Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 236)

Chapter 9- Hardware Specifications
Chapter 9-36 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
The External Power Supply, 9SA-PWEX-000
100-249 VAC, 47-63 HZ to -48DC
G
ENERAL
DESCRIPTION
The external power supply is used in applications where -48DC is not available.
It can be placed on a table top or be wall mounted. It is used with the 9SA-
PW00-000 Internal Power Module.
H
ARDWARE
S
PECIFICATIONS
Output voltage: -48 VDC E
LECTRICAL
C
HARACTERISTICS
Power Output: 100 W maximum continuous, convection cooled
125 W Peak for 1 second
150 W peak for 0.1 second
Regulation: Load: ± 1% maximum @ 20% to 100% of load and
nominal AC line.
± 2.5% maximum at o% load.
Line ± 1% maximum @ low to high line with
maximum rated load.
NOTE: Regulation measured at end of properly terminated
6'/152mm DC output cable.
Longer cables may effect regulation.
Hold-up time: 12mS minimum @ rated load and nominal line
Ripple & noise Does not Exceed 2% p/p of nominal output at rated
load.
Input: 100 -240VAC 47 - 63 HZ
Inrush Current: 20A @ 110v VAC with a cold unit. 40A @ 220 VAC
input.
E
NVIRONMENTAL Operation Temp: 0° to 40° C, de-rated 25% at 50° C and 50% at 60° C
Humidity: 5% - 95% noncondensing
Altitude 0 to 10,000 feet
P
HYSICAL
C
HARACTERISTICS
Physical size Width: 4"
Height: 3" Length: 8"
Weight: 2.00 LB