Gasboy Atlas Start-up - Manual (Page 90)

Page 5-30 MDE-4334D Atlas™ Start-up and Service Manual · July 2013
Electronic and Electrical Components Atlas 9800 Parts
Atlas 9800 Pulse-out I/F Board with EM Totalizer Drive (M06587A001)
The features of the Atlas 9800 Pulse-out I/F Board with EM Totalizer Drive are as follows:
• To be used with models calling out for Dual Channel, Dual Hose Pulse-out I/F (9850 Dual
Hose requires M05683A004 Revision B or later).
• This board assembly can be configured for use in one of the following pump/dispenser
configurations:
- Dual Channel, Single Hose Pulse-out I/F (see Figure 5-26 on page 5-35 ).
- Single Channel, Dual/Single Hose Pulse-out I/F (see Figure 5-27 on page 5-36 ).
- Dual Channel, Dual Hose Pulse-out I/F (see Figure 5-28 on page 5-36 ).
• Compatible with models 9852K, 9853K, 9850K, 9840K, 9852A/Q, 9853A/Q, 9850A/Q,
9840A/Q, 9822A/Q, 9823A/Q/K, 9862KX, 9872KX.
• Compatible with 9800 CPU Boards (C06391, C06392, C06393, C06394, C06500,
C06501, C06502, C06503, M05346A001, M05346A002, M05346A003, M05346A004,
M06333KXXXX).
• Can be used in place of previous 9800 Pump I/F Board with Dual Channel, Single Hose
Pulse-out I/F (C06746).
• Can be used in place of previous 9800 Pump I/F Board with Single Channel, Dual/Single
Hose Pulse-out I/F (C06425).
Note: 9850A/Q/K models cannot use M05158A00X Boards. They can use M06587A001,
C06425, and C06746 Boards only.
Figure 5-24: Atlas 9800 Pulse-out I/F Board with EM Totalizer Drive (M06587A001)