System and component overview, About service procedures, System and component overview -8 – Gasboy Atlas Start-up User Manual
Page 68: About service procedures -8

Page 5-8
MDE-4334D Atlas™ Start-up and Service Manual · July 2013
Electronic and Electrical Components
About Service Procedures
System and Component Overview
In this section, cautions and warnings for electronic components will be addressed. Extreme
care must be taken while using explosive vapors or liquids, which may be present around the
dispensing equipment. These vapors can be ignited by flames, electrical arcs, or static
electricity discharges. An electrical shock hazard exists when working with this equipment.
An electrical discharge can cause injury, ignite vapors, or damage sensitive electronic
components. All safety precautions and requirements must be strictly followed.
About Service Procedures
shows an example of a Front-load and Side-load Atlas 8800 Retail unit. The nozzle
boot is located either on the front or side of the unit.
Figure 5-1: Atlas 8800 Retail Pumps - Side and Front-load
Front-load Unit
Side-load Unit