Gasboy Atlas Start-up - Manual (Page 21)

MDE-4334D Atlas™ Start-up and Service Manual · July 2013 Page 1-13
Model Information Read This First
Model Series
Series Description
9100K Mechanical Commercial Pumps and Dispensers
9800K Electronic Commercial Pumps and Dispensers
8700K Mechanical Retail Pumps and Dispensers
8800K Electronic Retail Pumps and Dispensers
9860KX Electronic DEF Dispensers Only
9870KX Electronic Commercial Dispensers for Alternative Fuels (E85)
Model Flow Rates
Series Designation (Digits 1 and 2) Flow Rate Designation (Digits 3, 4, and 5) Flow Rate Quantity
91/98/87/88 52K 15 GPM (57 LPM)
91/98/87/88 53K 22 GPM (83 LPM)
91/98/87/88 40K 40 GPM (151 LPM)
98 50K 50 GPM (190 LPM)
98 60K (DEF Only) 10 GPM (38 LPM)
98 72K 15 GPM (57 LPM)
Note: The flow rates shown are under ideal conditions and will vary depending on the hanging hardware
involved, Submersible Turbine Pump (STP) sizing, number of units dispensing at the same time, and
inlet piping to the unit. These are not guaranteed flow rates.
Atlas Model Number Table
The Atlas model number uses a series of four numbers and five letters stamped into the serial
plate to denote the machine type and configuration. To determine the pump/dispenser type that
is denoted on the serial plate, refer to the following table:
Gasboy Atlas Model Code
Retail Model Code
Breakdown Commercial Model
Code Breakdown
8
X X X X X X X X 9 X X X X X X X X
Product Name: Product Name:
ATLAS 8 ATLAS 9
Product Series: Product Series:
- Retail,
Mechanical 7 - Commercial,
Mechanical

Non-computing
1
- Retail, Electronic 8 - Satellite 2
Type: - Commercial
Electronic 8
- Full Size Cabinet 5 Type:
Flow Rates: - Narrow 1
- Ultra-Hi ™
Gallonage (40 to
50 gpm)
0 - Compact Cabinet 2
- Not used 1 - Full Size Cabinet 4
- Std Gallonage

(10 to 15 gpm)
2 - Full Size Cabinet 5
6
7