Gasboy Atlas Start-up - Manual (Page 20)

Read This First Model Information
Page 1-12 MDE-4334D Atlas™ Start-up and Service Manual · July 2013
Serial Number Plate and Date Codes
A two-letter date code is stamped on the serial number plate before the serial number. This
code shows the month and year of manufacture. For warranty purposes, refer to the date code
to determine the age of the equipment. The serial number plate is located on the “A” side at the
bottom of the unit attached to the inside of the frame.
To determine the date code on a Gasboy pump or dispenser, refer to the following tables:
Year Codes
P = 2005 U = 2009
R = 2006 W = 2010
S = 2007 X = 2011
T = 2008 Y = 2012
Figure 1-3: Serial Number/Model Identification
Serial Number
Model Number
For example, a serial number plate stamped “BP AT000199” contains the following
information:
• Date code [BP] - This unit was manufactured in B = February, P = 2005.
• Serial Number [AT000199]
Month Codes
A = January E = May J = September
B = February F = June K = October
C = March G = July L = November
D = April H = August M = December