Gasboy Atlas Start-up - Manual (Page 121)

MDE-4334D Atlas™ Start-up and Service Manual · July 2013 Page 6-1
Introduction Hydraulic/Mechanical Components
6 – Hydraulic/Mechanical Components
Introduction
Purpose
This section provides information regarding hydraulic systems and fuel handling mechanical
components contained within Gasboy Atlas units. It includes specific safety information,
typical testing procedures, information on related components and common service
procedures.
Important Information About Releases
Sections of this manual may be released or updated independently to supply the most current
data. Information about release date and version for independently released sections will be
included in the section title and footer of the document. For the latest updates, refer to GOLD.
This section was last updated in July 2013.
Topics in This Section
Topic Page
Hydraulic and Mechanical Highlights 6-2
General Service Procedures 6-4
Purging Air from System 6-9
Purging Air in DEF Systems 6-12
Measuring Pressure and Vacuum 6-14
Measuring Vacuum for Pump 6-19
Meter Calibration 6-22
Meters 6-26
Filters and Strainers 6-37
Hanging Hardware 6-41
Pumping Unit 6-50
Pump Motor 6-62
Valves 6-65
Vapor Recovery Stage 2 Balance Type 6-73
Mechanical Computers 6-73
How to Use This Section
For the list of topics contained in this section and their respective locations, refer to

“Topics in This Section” . Use this list to obtain information regarding specific components.