Gasboy Atlas Start-up - Manual (Page 24)

Read This First Model Information
Page 1-16 MDE-4334D Atlas™ Start-up and Service Manual · July 2013
Internal Hose Retriever
Internal Hose Retrievers are also available for all Atlas pump models. The Atlas DEF cold
weather unit has a built-in hose reel.
Satellite Piping
Satellite Piping is available on the 9850 pump and all remote dispensers except Atlas DEF and
E85 dispensers. This option will provide the internal piping required to connect to a 9215 or
9216 satellite dispenser.
Hand Crank
Hand Cranks are available for installations in locations, where power availability is a concern.
This option is only available for suction pumps.
Solenoid Valve
A two-stage slow down valve is available for units in retail applications. This option is
standard on all remote dispensers.
Pulse Output
Pulse output is available for all the 9800 pump models and some 8800 models. The pulse
output board for the 8800 model will be different from the 9800 model. Veeder-Root
® pulsers
will be provided for mechanical units, when specified. An additional pulse output board must
be ordered when connecting an Electronic unit to an FMS requiring mechanical type pulses.
Factory installation as well as field retrofit kits will be available for all pulse output options.
RS-485 Interface
When connecting a 9800 model to a Gasboy Cash Flow Network (CFN), TopKAT PLUS or
TopKAT system, an RS-485 Interface Board must be installed in the unit. The interface can be
ordered and installed at the factory. Field installation kits are also available.
Note: The RS-485 Interface Board is not available for the 8800 model.
Local Area Network (LAN) Interface
When a TopKAT PLUS is mounted on the 9800 model, a LAN cable is factory installed with a
LAN jack at the end in the Junction Box (J-box) for Transmission Control Protocol/Internet
Protocol (TCP/IP) communications.
Battery-backed Power Supply
Until summer of 2012, a battery-backed power supply was an option for all the 9800 models.
This option was required for units used in a Retail application. If power was lost to the unit,
the battery allowed the last transaction amount to remain on the display to meet Weights and
Measures (W&M) requirements. The 8800 series and current 9800 series displays are backed
up by a super cap that performs this function at the display.
Manual Reset
Manual resets are available for mechanical units and export orders only.