Gasboy Atlas Start-up - Manual (Page 23)

MDE-4334D Atlas™ Start-up and Service Manual · July 2013 Page 1-15
Model Information Read This First
• K - Hand Crank
• L - Lighted Display Panel
• PP - Slowdown Valve
• PPS - Satellite Internal Piping - 9850K
• R - Liters Registration
• S - Internal Satellite Piping
• SS - Stainless Steel - All Panels
• SSA - Stainless Steel - Front and Back
• SSTS - Stainless Steel - Top and Sides
• TW1 - Dual Hose Single Product
• TW2 - Dual Hose Dual Product
• TW3 - Satellite Combo Unit
• V - Vapor Recovery Complete
• WW - Warm Weather (DEF Units Only)
• X - Remote Dispenser
• Y - Vapor Recovery Ready
• Z - Front Load Nozzle Boot
• 25 - 230 VAC, 50 Hz
• 35 - 380 VAC, 50 Hz
• 36 - 380 VAC, 60 Hz
Options Overview
This section provides an overview of the options available in Atlas dispensers.
TopKAT
The TopKAT Fuel Management System (FMS) can be ordered factory mounted on any 9800
unit except Atlas DEF dispenser. TopKAT PLUS FMS can be ordered factory mounted on any
9800 unit. This Plug and Play option increases the ease of installation and provides customers
with a user-friendly fuel reporting system. The TopKAT system is also available as a pedestal
mounted unit and for use with Mechanical pumps.
Electric Keytrol (EK)
The Electric Keytrol can be ordered factory mounted on the 9100 series. The EK provides
each customer with a personal key slot and totalizer to record their fueling amounts.
Configurations are available for both single and twin units.
Vapor Recovery
Balanced Vapor Recovery kits are available for all the K pump units except Atlas DEF and
E85 dispensers. Following two kits are available:
• Vapor Recovery Complete
• Vapor Recovery
The Vapor Recovery Complete kit provides everything required for a balanced system from
the high hose retriever to the splitter, all the way to the nozzle.
The Vapor Recovery kit is a retrofit kit used when providing your own vapor recovery system.
This kit will provide a new nozzle boot and hook to allow a stage two nozzle to be mounted on
the dispenser.
High Hose Retriever
High Hose Retrievers are also available for standard hoses. Hose clamps are available for a
variety of hose sizes, up to lengths of 15 inches.