Gasboy Atlas Start-up - Manual (Page 226)

Preventive Maintenance and Inspection Preventive Maintenance Table
Page 9-12 MDE-4334D Atlas™ Start-up and Service Manual · July 2013
Wash 
pump/dispenser
As required
Note: Gasboy
recommends
more frequent
cleaning for
pumps/
dispensers
located in
salty or
corrosive
environments,
such as near
the ocean or
near pollution
sources.
Clean with automobile cleaning products. Clean plastic surfaces with
water and mild detergent. Do not wash with a hose. Do not use window
cleaners with ammonia on electronic display windows.
Adhere to the following guidelines while washing pumps/dispensers:
• Clean and protect your equipment with automobile cleaning and
protection products.
• Clean plastic surfaces and polycarbonate graphics with a solution of
water and mild detergent.
• Use a soft cloth, paper towel, or sponge to clean displays separately.
Window cleaners are preferred.
Wash pumps/dispensers by hand, or use a hose nozzle set to a fine
gentle spray.
CAUTION
Moisture can damage the internal components of a pump/dispenser.
Internal components exposed to moisture may not operate correctly or fail.
Water damage of electronic components where pressurized hoses are
used during cleaning is not covered by warranty.
Do not use a pressure washer to clean the pumps/dispensers.
Owner
Components
Recommended
Frequency
Recommended Maintenance
Who Performs the
Inspection/Repair