Gasboy Atlas Start-up - Manual (Page 215)

MDE-4334D Atlas™ Start-up and Service Manual · July 2013 Page 9-1
Introduction Preventive Maintenance and Inspection
9 – Preventive Maintenance and Inspection
Introduction
Purpose
This section provides information on preventive maintenance and associated inspections.
Preventive maintenance is essential to prevent the unexpected downtime of units. The
“Preventive Maintenance Table” on page 9-6 provides maintenance recommendations.
Important Information About Releases
Sections of this manual may be released or updated independently to supply the most current
data. Information about release date and version for independently released sections will be
included in the section title and footer of the document. For the latest updates, refer to GOLD.
This section was last updated in July 2013.
Topics in This Section
Topic Page
Preventive Maintenance 9-1
Performing Inspections 9-2
Replacements and Adjustments 9-4
Preserving Finish 9-5
Preventive Maintenance Table 9-6
How to Use This Section
Discuss the suggested maintenance items with the station owner. Review the

“Preventive Maintenance Table” on page 9-6 to be familiar with preventive maintenance tasks
you may have to perform at the site.
Preventive Maintenance
Maintenance Procedures and Parts
Gasboy Atlas pumps and remote dispensers are designed for years of uninterrupted service.
However, certain pump or dispenser parts will experience normal wear and therefore will
require periodic inspections. For example, detecting fuel leaks that may occur, belt tension and
belt condition, lubrication and strainer cleanliness, are all important to maintain safe and
efficient unit operation. Therefore, to avoid annoying pump shut downs, a periodic preventive
maintenance inspection plan must be established and followed.
Procedures requiring leak repair, shear valve maintenance, and disassembly of portions of the
pump/remote dispenser must be performed by an ASC.