4 urom_movedp1, 5 urom_movedp1inc, 6 urom_movedp1dec – Maxim Integrated MAXQ610 User Manual
Page 198: Maxq610 user’s guide
15-5
MAXQ610 User’s Guide
15.2.4 UROM_moveDP1
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 2-4 and Figure 2-5 . When a byte mode address is used, CDA0 must be set appropriately to access either
the upper or lower half of program flash/ROM memory .
• This function automatically refreshes the data pointer before reading the byte/word value.
15.2.5 UROM_moveDP1inc
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 2-4 and Figure 2-5 . When a byte mode address is used, CDA0 must be set appropriately to access either
the upper or lower half of program flash/ROM memory .
• This function automatically refreshes the data pointer before reading the byte/word value.
15.2.6 UROM_moveDP1dec
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 2-4 and Figure 2-5 . When a byte mode address is used, CDA0 must be set appropriately to access either
the upper or lower half of program flash/ROM memory .
• This function automatically refreshes the data pointer before reading the byte/word value.
Function:
UROM_moveDP1
Summary:
Reads the byte/word value pointed to by DP[1] .
Inputs:
DP[1]: Address to read from .
Outputs:
GR: Data byte/word read .
Destroys:
None .
Function:
UROM_moveDP1inc
Summary:
Reads the byte/word value pointed to by DP[1], then increments DP[1] .
Inputs:
DP[1]: Address to read from .
Outputs:
GR: Data byte/word read .
DP[1] is incremented .
Destroys:
None .
Function:
UROM_moveDP1dec
Summary:
Reads the byte/word value pointed to by DP[1], then decrements DP[1] .
Inputs:
DP[1]: Address to read from .
Outputs:
G: Data byte/word read .
DP[1] is decremented .
Destroys:
None .