Reviewing trends – Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual User Manual
Page 97
Directions for Use
Storing and reviewing patient data
93
6.
To change the source of the displayed waveform, see
7.
To change the size of the waveform, see
8.
From this display, you can switch to another type of display or you can exit and return
to the primary display. To do this, highlight Snapshots and press
. The Trends menu
appears, from which you can exit or switch to another display—Tabular, Tabular and
Waveform, or Graphical. To switch to the split display, for example, highlight Tab/
Wave and press
.
Figure 94. Snapshots display: switching to another display
Reviewing trends
To review trends
From any main display screen (such as Large Numerics, Dual Waveform...):
1.
Highlight
, HR/PR, SpO2, NIBP, Resp, or
.
2.
Press
.
3.
Highlight Trends and press
. The Trends display appears.
Use
and
to scroll through the list of trends.
•
Red indicates an alarm.
•
indicates that a snapshot exists for this trend. Highlight
and press
to
view the snapshot.
•
indicates that the snapshot for this trend was overwritten with a more recent
snapshot and is not available for viewing.
•
--- indicates a value below the monitor’s measurement range.
•
+++ indicates a value above the monitor’s measurement range.
•
??? indicates an undetermined value.
STEWART, ANN
STEWART, ANN
7762940
7762940
15:14:28
15:14:28
Adult
Adult
Rm 263
Rm 263
HR/min
HR/min
NIBP mmHg
NIBP mmHg
Resp/min
Resp/min
SpO2
SpO2
II 1mV/cm
II 1mV/cm
Snapshots
Snapshots
2/21/05
2/21/05
5 Sec after
5 Sec after
14:34:58
14:34:58
80
80
12
12
97
97
80
80
n/a
n/a
12
12
97
97
%
%
#5 of 5
#5 of 5
Trends
Trends
Tabular
Tabular
Tab/Wave
Tab/Wave
Graphical
Graphical
Snapshots
Snapshots
Exit
Exit