Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual - Manual (Page 127)

Directions for Use 123
Configuration worksheet
Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Define monitor ownership and support responsibility, define parameters related to
your locale, and name the configuration.
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Define the power-up settings for monitor behavior.
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Select and define the content of Display 1, Display 2, and Display 3.
Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Specify the default settings for Adult, Pediatric, and Neonatal patients.
ParamSet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Define the alarm-limit adjustment percentages (ParamSet) for systolic, diastolic, and
mean pressures, HR/PR, SpO
2
, and Resp.
Feature Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Define the general properties of the monitor.
Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
The final page of the worksheet identifies the person responsible for defining the
custom configuration. The information on this page is not part of the monitor
configuration.
Note For each parameter, the factory value is shown in bold. To specify a different
value, circle, underscore, or enter another value.
Note All required parameters are set at the factory. The monitor works even if you do
not change any settings.