Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual - Manual (Page 186)

182 Compliance Welch Allyn Propaq LT Vital Signs Monitor
Recommended separation distances between portable and mobile RF communications equipment
and the Charging/Communication Cradle with Propaq LT Series monitor
The Charging/Communication Cradle with Propaq LT Series monitor is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The customer or the user of the Charging/Communication
Cradle with Propaq LT Series monitor can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the Charging/Communication Cradle
with Propaq LT Series monitor as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 3.5
80 MHz to 800 MHz
d = 1.2
800 MHz to 2.5 GHz
d = 1.2
0.01 0.35 0.12 0.23
0.1 1.1 0.38 0.73
1 3.5 1.2 2.3
10 11 3.8 7.3
100 35 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (w) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
P P P