Printing manually, Canceling a print request, When uploading is complete – Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual User Manual
Page 105: Creating a pdf of patient data
Directions for Use
Printing patient data
101
2.
Click On or Off.
You can use the AutoPrint Utility to print automatically (the default function) or manually.
Printing manually
To print manually
1.
Start -> All Programs -> Welch Allyn -> Propaq LT Monitor -> AutoPrint On-Off
2.
Click Off.
3.
Start -> All Programs -> Welch Allyn -> Propaq LT Monitor ->
Print Snapshots and Trends
Canceling a print request
When the utility receives a print request, it immediately uploads patient data from the
monitor to the PC and presents a print dialog. You have 10 seconds to cancel the print
request (which automatically exits the AutoPrint Utility). If you do not cancel, the utility
prints the patient data.
When uploading is complete
When the data has been uploaded and sent to the printer, the utility presents the options
to reprint the current data, print the data from another monitor, or exit the utility.
If you select to reprint, the data is printed again.
If you select to print data from another monitor, the utility prompts you to replace the
monitor in the cradle with another monitor.
If you select to exit, the utility exits.
If you do nothing for one minute after the data is uploaded to the PC, the utility exits.
Creating a PDF of patient data
This procedure requires a PC connected to a monitor and cradle via a USB cable. The
Welch Allyn AutoPrint Utility must be installed on the PC, but not running. The cradle
must include the USB data transfer option.
To create a PDF of patient data
1.
On the PC, install a PDF writer tool.
Many PDF writer tools are available. For example, you can find PDF writer tools at the
following web locations:
•
Note
All patient data is deleted from the PC when it is sent to the printer. If you insert
another monitor and upload the data from it, the data from the previous upload is
lost.