Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual - Manual (Page 48)

44 Overview of monitor operation Welch Allyn Propaq LT Vital Signs Monitor
Power saving
To maximize battery life, the monitor display shuts off when the following conditions are
all true:
• No button press for a period of n seconds. (n is configurable.) See “Timing out the
display and the back light” on page 20.
• No active alarms or alerts
• No Acuity Message window
• No Patient ID entry window
Turning off the monitor
To turn off the monitor
Press .
The Power-off screen appears:
Figure 41. Power-off screen
Highlight the desired action and press .
Communicating with an Acuity Central Station
See “Monitoring in communication with Acuity” on page 73, and see Acuity Directions
for use.
About error detection
The monitor can detect conditions that prevent it from operating properly. If this occurs, it
displays an error message and an error number. Follow the directions displayed on the
screen.
Note If you press to power down before leaving the power-on screen ( Figure 7 on
page 13), the monitor shuts down without presenting the screen shown above.
Select ( ) to delete patient data Select ( ) to delete patient data
You have pressed the Power Off button. You have pressed the Power Off button.
Delete & Shut Down Delete & Shut Down Cancel Cancel Setup Setup
and shut down. and shut down.
15:01:24 15:01:24
Adult Adult Rm 239 Rm 239
There is patient data stored for There is patient data stored for
Hall, Robert E. ID: 3456187 Hall, Robert E. ID: 3456187
Save & Shut Down Save & Shut Down
HALL, ROBERT E. HALL, ROBERT E. 3456187 3456187