Storing and reviewing patient data, Overview, Capturing a data snapshot – Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual User Manual
Page 95: 6 - storing and reviewing patient data, Overview capturing a data snapshot

6
91
Storing and reviewing patient data
Overview
The monitor stores up to 24 hours (at one-minute intervals) of trends information for the
patient being monitored. When data storage is at capacity, the data from each new
reading replaces the data from the oldest.
Capturing a data snapshot
Press
to capture a 21-second period of numeric and waveform patient data. The
monitor captures the 14 seconds preceding and the 7 seconds following the button press.
The monitor can store 20 snapshots. After 20 snapshots have been taken, each new
snapshot replaces the oldest snapshot in memory.
Table 9. Store and review patient data
All monitors
Wireless monitor
Type of data
TRENDS
•
Tabular or graphical.
•
Include maximum of 24 hours of trend data taken at:
1
-
minute intervals
NIBP and SpO
2
Spot Checks
Snapshots
SNAPSHOTS
•
21 seconds of numeric and waveform data: 14 seconds
before and 7 seconds after the snapshot request.
•
Press
to take snapshots. (Maximum: 5 snapshots
per minute.)
•
Maximum of 20 snapshots stored. At capacity, each
new snapshot overwrites the oldest.
Up to 96 hours (depends on Acuity
system) of full disclosure data
includes:
•
numerics and waveforms
•
status
Where stored
Monitor
Acuity via wireless communication
Where reviewed
Monitor
Printer (with AutoPrint)
Acuity
140
40/ 78
78
80
80
12
12
97
97%
HALL, ROBERT E.
HALL, ROBERT E.
3456187
3456187
3:00:06P
3:00:06P
Adult,
Adult,
Rm 239
Rm 239
HR/min
HR/min
NIBP mmHg (102)
NIBP mmHg (102)
@2:47P Manual
@2:47P Manual
Resp/min
Resp/min
SpO2
SpO2
SpO2
SpO2
2x
2x
II 1mV/cm
II 1mV/cm
Propaq LT
Press
to take a Snapshot